GATE ME · General Awareness

GATE ME Machining Forces Questions with Answers and Solutions

Solve real machining forces questions with step-by-step solutions — free preview, no login required.

Inside view · free preview

GATE ME Machining Forces practice

Topic-wise practice1 questions 5 min

1Preview question 1 of 1 · instant answer reveal

In orthogonal turning of a cylindrical tube of wall thickness 5 mm, the axial and the tangential cutting forces were measured as 1259 N and 1601 N, respectively. The measured chip thickness after machining was found to be 0.3 mm. The rake angle was 10° and the axial feed was 100

mm / min

. The rotational speed of the spindle was 1000 rpm. Assuming the material to be perfectly plastic and Merchant’s first solution, the shear strength of the material is closest to

Choose one answer to reveal the solution.

This is a 1-question preview. The full 1-question timed test opens after free signup.

What visitors can use on this page

The preview questions and their step-by-step solutions are public. The full machining forces test, saved progress, performance reports, Maya AI chat, friend battles and the personalised plan open the signup modal.

GATE ME Machining Forces practice FAQ

Can I solve these GATE ME Machining Forces questions for free?

Yes. The preview questions, answers and step-by-step solutions on this page are free to read without any login.

What opens after free signup?

Signup unlocks the full GATE ME Machining Forces topic test, saved attempts, performance analysis, Maya AI doubt-chat, friend challenges and a personalised study plan.

Are the solutions explained step by step?

Yes. Every question here carries a worked solution so you understand the method, not just the final answer.

Prepare together, not alone

GATE ME Machining Forces practice

What visitors can use on this page

GATE ME Machining Forces practice FAQ

Prepare together, not alone

GATE ME Machining Forces practice

What visitors can use on this page

GATE ME Machining Forces practice FAQ